久久涩涩,成人夜间福利,91免费国产在线

How does IMPRESIND Gas radiant heating System ensure its safety?

time：2023-09-11
hits：1689次
source：正弘奧能

The climate in the north of our country is extremely cold, industrial plants must be heated in the winter, the heating system is extremely important in the process of selection, at present, the heating system used in our industrial plants is still the traditional heating system, this system consumes a lot of energy in the process of utilization, causing air pollution, so we must use a new type of heating system.The industrial plant in the north is less than 2m of equipment and personnel intensive space, to ensure that the hot air can stay in this range, which can meet the basic requirements of industrial production, in terms of reducing energy consumption is also very favorable.Therefore, in order to overcome the impact of height on vertical imbalance, gas infrared radiation heating systems are used in industrial plants in tall Spaces.


	 


	Gas infrared radiation heating system is a kind of heating system with liquefied petroleum gas and natural gas as the main fuel.The radiation belt can be installed directly above the building by the suspended ceiling.The heat generator is installed on the outside of the building, such as the roof, side walls and other locations, and does not occupy the internal space of the building.The generator performance is stable, so the use of gas radiation heating system will not increase the fire risk level and design difficulty of the building.


	 


	<img src="http://m.daanda.com.cn/Uploads/image/20230912/20230912102529_98066.png" alt="" />


	 


	IMPRESIND gas radiant heating system as the main heating equipment of Beijing Leadway Power Co., LTD., through more than 10 years of promotion and application, has become one of the leading products of gas radiant heating in the Chinese market.It is composed of three parts: heat generator, radiation belt and control system.So, how does IMPRESIND&nbsp;gas radiation heating system ensure its stability and safety?


	 


	(1) ion flame monitoring probe 


	The ionization electrode can be used to detect whether the equipment is firing normally, and the signal is transmitted to the control module through the induction needle.To keep the flame from jumping and burning.


	 


	(2) Equipment operation voltage regulator 


	The intake valve of the equipment is a slow opening and fast closing configuration, and the intake valve gradually opens with the amount of air inhalation, the intake ratio is stable, the current is stable, and the air and gas always maintain the best combustion ratio until the flame gradually reaches the maximum combustion state, effectively ensuring that the flame does not deignite and the equipment plays the best performance stably.


	 


	(3) Power delay protection device 


	Prevent the hot air flow back when the equipment is stopped from damaging the equipment components, and prevent the hot air from accumulating in the radiation pipe to form condensate.


	 


	(4) Host constant temperature protection device 


	Automatically executes the pre-set temperature (10-40 ° C) to prevent the components in the generator from being damaged by low temperature and the filter from freezing.


	 


	When the equipment starts, the micro positive pressure fan starts, after the micro difference switch is closed, the negative pressure fan starts, after the negative pressure switch is closed, the burner ignits.The micro positive pressure fan can ensure the stability of the flame without flame spillover, and the negative pressure fan can well elongate the flame in the radiation tube to ensure the combustion efficiency.The dual fan configuration ensures flame safety to a large extent.There is a flame ion monitoring port (fire window) in the generator, which can check whether the ignition needle is normal, whether the flame is normal, and the whole device is completely closed, which can effectively ensure the safety of debugging or maintenance personnel.

av黄色_亚洲更新最快无码视频_亚洲在线www_成人av网址在线_自慰无码一区二区三区_国产乱码精品一区二区

How does IMPRESIND Gas radiant heating System ensure its safety?