黄色v片,水莓100完全国产免费,国产在线不卡午夜精品2021

Large-space industrial buildings use hot water radiant panel heating, reducing energy consumption and reducing costs

time：2023-08-24
hits：1384次
source：正弘奧能

The industrial plant is one of the indispensable facilities in the production process, and in order to ensure the stable operation of the production line in winter, heating is the key.At present, domestic enterprises use traditional heating methods, such as radiators, heaters, etc., but the heating efficiency is low, the energy consumption is large, the operation noise is large, the operation cost is high, and the comfort is low can not be ignored.The root cause of low heating efficiency and large energy consumption is determined by the nature of convective heating mode, that is, direct heating of air, caused by large temperature gradient.Compared with convective heating, infrared radiation heating, no convection phenomenon, small thermal inertia, no long time preheating, heating speed is fast.In high-space industrial buildings, reducing vertical gradient heat loss means saving energy and economic costs.


	 


	<img src="http://m.daanda.com.cn/Uploads/image/20230824/20230824100746_33222.png" alt="" /> 


	 


	In the infrared radiation heating products, the hot water radiation panel uses hot water as the heat transfer medium, the radiation panel is arranged in a series of strips, and is installed above the heating space in the form of a suspended ceiling. The system is superior to the traditional radiator convection heating and hot air heating equipment, which solves the problem of poor heating effect and high energy consumption in the convection way in the tall space, and is the ideal heating technology for tall space buildings.


	 


	Hot water radiant panel heating can be used for full heating of buildings with a height of 3m~30m and local area or local workplace heating, and can be used in volatile and flammable building environments, including large shipyards, ships, aircraft and automobile maintenance halls, building materials markets, shopping centers, exhibition venues, multi-functional stadiums and entertainment halls and many other occasions.Do not increase the fire rating of the building, will not cause the risk of fire and explosion.


	 


	<img src="http://m.daanda.com.cn/Uploads/image/20230824/20230824100756_26100.png" alt="" /> 


	 


	ECOPAN hot water radiant panel is made of metal tube sheet, which is prefabricated in the factory into a standard length of 3 meters, 6 meters (special requirements can be prefabricated 2 meters, 4 meters).Each radiant panel can be connected with a quick connector.Each radiant panel and collection pipe is prefabricated in the factory and tested for safety.The bracket of the suspension plate is welded together with the radiant plate, one per meter, which greatly guarantees the flexibility of the installation.The hot water radiant panel adopts an innovative design concept, with the pipe as the warmest part of the panel, completely down, and 70% of the surface is wrapped by the metal plate (the wrapping Angle is more than 280°), which increases the heat transfer area and perfectly ensures the transfer of heat from the tube to the plate.


	 


	With the same dimensional characteristics (pipe diameter, number and spacing, panel width), ECOPAN hot water radiant panels have higher thermal energy efficiency than other products on the market.This makes it possible to use fewer products to meet the same heating requirements, saving on materials and installation costs.Hot water radiant panel has long service life and low maintenance cost.It does not require any special maintenance, but is insignificant compared to its energy-saving characteristics.

av黄色_亚洲更新最快无码视频_亚洲在线www_成人av网址在线_自慰无码一区二区三区_国产乱码精品一区二区

Large-space industrial buildings use hot water radiant panel heating, reducing energy consumption and reducing costs